Hyperplast PC190-PlusR
High performance early strength concrete hyperplasticiser
Hyperplast PC190-Plus R is a high performance early strength concrete hyperplasticising admixture based on polycarboxylic ether polymers with long chains specially designed to enable the water content of the concrete to perform more effectively.
This effect can be used in high strength concrete and flowable concrete mixes, to achieve highest concrete durability and performance.
- Optimises cement utilisation.
- High density and impermeable concrete through extreme water reduction.
- Improves shrinkage and creep behaviours.
- Minimises segregation and bleeding problems by improving cohesion.
- Higher early and ultimate compressive strengths.
- Increases durability and resistance to aggressive atmospheric conditions thorough reduced permeability.
- High strength and high performance concrete.
- Structures with congested reinforcement.
- Pre-cast concrete.
- Improved cohesion allowing for use in mass concrete pours and piling.
- Self compacting concrete.
Hyperplast PC190-Plus R is available in 25 litre pails, 210 litre drums and 1000 litre bulks supply.
Hyperplast PC190-Plus R has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.
The recommended dosage of Hyperplast PC190-Plus R is 0.5 - 3.0 litre per 100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.
Trials should be conducted to determine the optimum dosage of Hyperplast PC190-Plus R to meet the performance requirements by using the materials and
condi ons in actual use.
Hyperplast PC190-Plus R complies with ASTM C494 Type F and EN 934, Part2, Table 3.1 and 3.2, depending on dosage used.
