Strongcoat DPM
Epoxy damp-proof membrane
Strongcoat DPM is a two pack, solvent free epoxy based damp-proof membrane for use with the DCP range of surface coatings and toppings. It suppresses residual construction moisture and rising dampness in concrete and sand/cement screeds and can be used in situations where the relative humidity level is above 75%. It is applied by brush or roller in one or two coats depending on the relative humidity of the floor.
Downloads
Strongcoat DPM.pdf
Technical Data Sheet
Strongcoat DPM- Base_3.pdf
Safety Data Sheet - Base
Strongcoat DPM - Hardener_3.pdf
Safety Data Sheet - Hardener
Strongcoat DPM is applied at a coverage rate of 3.5 - 3.7 m²/kg to achieve approximately 200 micron DFT per coat.
Strongcoat DPM is available in 5 kg packs.
Strongcoat DPM has a shelf life of 12 months from date of manufacture if stored at temperatures between 5°C and 40°C.
