Cempatch SBR100
Liquid polymer bonding agent for cement containing mixes
Cempatch SBR100 is a one component styrene butadiene rubber latex bonding agent. Cempatch SBR100 is designed to improve the physical properties of cement mixes and slurries.
Downloads
Cempatch SBR100_TDS_6.pdf
TDS
Cempatch SBR100_11.pdf
SDS
Cempatch SBR100_MS_0.pdf
MS
- Successfully increases the bonding/adhesion of cement mixes.
- Effective plasticiser giving improved workability and cohesion.
- Improved mechanical and physical properties by increasing tensile, flexural and adhesive strengths.
- Good freeze/thaw resistance.
- Chloride free.
- Non-toxic, can be used for concrete in contact with potable water.
Cempatch SBR100 is ideally designed for use in the following applications:
- Bonding of new to old concrete when used as a slurry coat.
- To produce various traditional cement/sand adhesive mortars such as block mortar, plaster/render and tile adhesive.
- To produce a mechanical key prior to rendering of various plaster mixes on concrete, brick and block surfaces.
Cempatch SBR100 is available in 5, 25 and 200 litre drums.
Cempatch SBR100 has a shelf life of 12 months from date of manufacture if stored at temperatures between 5°C and 35°C in closed packaging.
Cempatch SBR100 complies with:
- ASTM C1059-99, Type 1, when tested in accordance with test method ASTM C1042.
- ASTM C932, for bond strength.
- ASTM C1438, for compressive strength.
