Flo-Grout 80
General purpose non-shrink cementitious grout
Flo-Grout 80 is a pre-mixed, pre-packed cementitious grout, composed of a blend of dry powders and selected aggregates which when mixed with water produce a shrinkage compensated, free flowing, high strength pumpable concrete.
Downloads
Flo-Grout 80.pdf
TDS
Flo-Grout 80_0.pdf
SDS
Flo-Grout 80_2.pdf
MS
- Good non-shrinkage characteristics.
- Extremely dense and low permeability.
- High early strength development allowing for rapid installation.
- High flow can be poured or pumped into variable gap widths down to 10 mm.
- Easy to apply, single component which require only addition of water.
Flo-Grout 80 is ideally designed for use in the following applications:
- Machine beds.
- Stanchion bases, struts, railings, and guardrail assemblies.
- Filling of shutter tie rod openings.
- Anchoring of tie bars, and bolts. » Pile top re-profiling.
Flo-Grout 80 is available in 25 kg bags.
Flo-Grout 80 has a shelf life of 12 months from date of manufacture if stored at temperatures between 2oC and 50oC.
Approximately 10.4 litre per 25 kg bag depending on consistency.
