Flo-Grout WT
Ultra-high strength non-shrink cementitious precision grouts for extremely heavy duty applications
Flo-Grout WT is a pre-mixed, shrinkage compensated chloride and hydrogen free precision grout that consists of unique composition of cement, well graded aggregate and special additives which when mixed with water produces a highly flowable grout with exceptional early and ultimate strength.
Downloads
Flo-Grout WT_TDS.pdf
TDS
- Exceptional compressive and flexural strengths.
- Very high early strength development allowing for rapid installation.
- Shrinkage controlled cementitious grout to eliminate any potential cracks.
- Extremely dense and low permeability.
- High fatigue resistance.
- High flow characteristics, can be easily poured or pumped into variable gap widths down to 10 mm.
- Easy to apply, single component which requires only addition of water.
- Chloride and hydrogen free.
Flo-Grout WT is specially designed for heavy duty structural grouting applications such as:
- Wind turbine installation.
- Machinery and equipment under high loads.
- Bridge bearing pads and plinths.
- Anchoring of bolts, bars and stressing cables.
- Pile caps treatment.
Flo-Grout WT is available in 25 kg bags.
Flo-Grout WT has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 40°C in original unopened bags.
Approximately 11 - 12 litres per 25 kg bag.
