Cookie Consent by FreePrivacyPolicy.com

Flo-Grout BP

Non shrink cementitious precision grout

Flo-Grout BP is a pre-mixed, pre-packed, high early strength, cementitious grout. Flo-Grout BP is compound of cement, selected additives, well graded fillers, and non-reactive aggregates designed to give excellent flow properties, shrinkage compensation, and high compressive strength.

Downloads
Flo-Grout BP_TDS_0.pdf
TDS
Flo-Grout BP_MSDS_0.pdf
SDS
  • Non-shrink grout.
  • Suitable for use in hot areas.
  • Extremely dense and low permeability.
  • High initial and ultimate early strength development allowing for rapid installation.
  • Good flow, can be poured or pumped into variable gab widths down to 10 mm.
  • Easy to apply, single component, requires only addition of water.
  • Chloride free.

Flo-Grout BP is ideally designed for grouting areas beneath bridge bearing pads, heavy stanchion bases and base plates where high early strength grout is required.

Flo-Grout BP is available in 25 kg bags.

Flo-Grout BP has a shelf life of 12 months if stored at temperatures between 2°C and 50°C in original unopened bags.

Approximately 11 - 12 litre per 25 kg bag for Flo-Grout BP depending on consistency.

Flo-Grout BP complies with U.S. Corps of Engineers Specifications CRD-C588-79 and CRD-C 621 in term of workability and ASTM C1107-02, Grade A.