Sethard S100
Liquid surface hardener, dust proofer and curing aid for concrete surfaces
Sethard S100 is a liquid curing aid formulated from inorganic silicates.
Sethard S100 provides an excellent initial cure for concrete, then it begins to break down and naturally wear away from the surface to prepare concrete for coating with a multitude of protective and/or decorative top coats
- Easy to clean up , only needs a simple wash with clean water to prepare for covering or sealing.
- Contributes to the enhancement of the compressive strength of concrete at all ages.
- Single component.
- Easy application.
- Reduces effluence.
- Chloride-free.
Sethard S100 is recommended for new formwork cast-insitu concrete surfaces such as concrete walls, columns and for concrete floors.
Typical applications include:
- Industrial plants.
- Factories.
- Warehouses.
- Garages.
- Shopping malls.
- Service stations.
- Parking lots and driveways.
- Buildings.
The coverage is 4 - 7 m²/ litre per coat.
Notes:
- Coverage will depend on surface texture and porosity. For reference, the more porous or rougher the surface is, the lower the coverage.
- If required, Mock-up/Trial application shall be done at site to understand the actual coverage of different concrete surfaces.
Sethard S100 is available in 25 litre jerrycan and 200 litre drums.
Store in a dry area out of direct sunlight at temperatures between 5°C and 50°C.
Sethard S100 has a shelf life of 12 months from date of manufacture if stored in proper conditions and unopened packs.
