Strongcoat Conductive
Flow-applied electrostatic discharge (ESD) epoxy coating
Strongcoat Conductive is a flow applied solvent free, electrostatic conductive epoxy floor coating especially designed to provide electrostatic control properties to a variety of substrates in wide range of applications.
Strongcoat Conductive comprises of an epoxy primer, conductive base coat and 2.0 mm flow applied topcoat.
- Provides a conductive floor for static electricity to pass through to earth controlling static electricity.
- Provides anti-spark (spark-proof) whenever required for safety to prevent sparks.
- Provides a smooth finish.
- Hard wearing surface that can be subjected to heavy foot traffic and forklift traffic.
- Chemical resistant.
Strongcoat Conductive has a resistance between 5 x 104 and 1 x 106 ohms. Strongcoat Conductive is suitable for use in areas where a static conductive floor is required, such as:
- Electronic manufacturing facilities.
- Hospital operation theatres.
- Hazardous dust and chemical environments.
Strongcoat Primer: 5 m2/kg.
Strongcoat Conductive Basecoat: 4.5 m2/kg.
Strongcoat Conductive Topcoat: 3.4 kg/m2 @ 2 mm thickness.
Actual coverage can vary depending on the substrate conditions.
Strongcoat Primer: 5 kg packs.
Strongcoat Conductive Basecoat: 5 kg packs.
Strongcoat Conductive Topcoat: 15 kg packs.
Strongcoat Conductive base has a shelf life of 12 months from date of manufacture if stored at temperatures between 10oC and 35oC.
The material may form crystals when stored at temperatures below 10oC, in such cases, conditioning for 1 - 2 days at temperatures between 30 - 35oC with simple manual mixing is needed before application