Cookie Consent by FreePrivacyPolicy.com

Supaflo PC550

High performance concrete superplasticizer

Supaflo PC550 is a high performance super plasticising admixture based on polycarboxylic ether polymers with long chains specially designed to enable the water content of the concrete to perform more effectively.

This effect can be used in high strength concrete and flowable concrete mixes, to achieve highest concrete durability and performance.

Downloads
Supaflo PC550_TDS.pdf
TDS
Supaflo PC550_MSDS.pdf
SDS
  • Optimises cement utilization.
  • High density and impermeable concrete through very high water reduction.
  • Improves shrinkage and creep behaviors.
  • Minimises segregation and bleeding problems by improving cohesion.
  • Higher early and ultimate compressive strengths.
  • Increases durability and resistance to aggressive atmospheric conditions thorough reduced permeability.
  • High strength and high performance concrete.
  • Structures with congested reinforcement.
  • Pre-cast concrete.
  • Improved cohesion allow for use in mass concrete pours and piling.
  • Self compacting concrete.

Supaflo PC550 is available in 20 kg pails, 225 kg drums and 1000 litre bulks supply.

Supaflo PC550 has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.

The guidance dosage of Supaflo PC550 is 0.4 - 2.2 litre per 100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.

Representative trials should be conducted to determine the optimum dosage of Supaflo PC550 to meet the performance requirements by using the materials and conditions in actual use.

Supaflo PC550 complies with IS 9103:1999 and ASTM C494, Type A and G.