Supaflo PC560M
High performance early strength concrete hyperplasticiser
Supaflo PC560M is a high performance super plasticising admixture based on polycarboxylic polymers with long chains specially designed to enable the water content of the concrete to perform more effectively.
This effect can be used in high strength concrete and flowable concrete mixes, to achieve highest concrete durability and performance.
- Optimises cement utilization.
- High density and impermeable concrete through very high water reduction.
- Improves shrinkage and creep behaviors.
- Minimises segregation and bleeding problems by improving cohesion.
- Higher early and ultimate compressive strengths.
- Increases durability and resistance to aggressive atmospheric conditions thorough reduced permeability.
- Self compacting concrete.
- Structures with congested reinforcement.
- High strength and high performance concrete.
- Pre-cast concrete.
- Improved cohesion allow for use in mass concrete pours and piling.
Supaflo PC560M is available in 25 ltr jerrycan and 225 kg drums.
Supaflo PC560M has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.
The guidance dosage of Supaflo PC560M is 0.3 - 1.8 litre per 100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.
Representative trials should be conducted to determine the op mum dosage of Supaflo PC560M to meet the performance requirements by using the materials and conditions in actual use.
Supaflo PC560M complies with IS 9103:1999 and ASTM C494, Type G.
