Cookie Consent by FreePrivacyPolicy.com

Supaflo PC790ST

High performance early strength concrete hyperplasticiser

Supaflo PC790ST is a high performance super plasticising admixture based on polycarboxylic polymers with long chains specially designed to enable the water content of the concrete to perform more effectively.

This effect can be used in high strength concrete and flowable concrete mixes, to achieve highest concrete durability and performance.

Downloads
Supaflo PC790ST_TDS.pdf
TDS
Supaflo PC790ST_MSDS.pdf
SDS
  • Optimises cement utilization.
  • High density and impermeable concrete through very high water reduction.
  • Improves shrinkage and creep behaviors.
  • Minimises segregation and bleeding problems by improving cohesion.
  • Higher early and ultimate compressive strengths.
  • Increases durability and resistance to aggressive atmospheric conditions thorough reduced permeability.
  • Self compacting concrete.
  • Structures with congested reinforcement.
  • High strength and high performance concrete.
  • Pre-cast concrete.
  • Improved cohesion allow for use in mass concrete pours and piling.

Supaflo PC790ST is available in 20, 225 kg drums and 1000 litre bulks supply.

Supaflo PC790ST has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.

The guidance dosage of Supaflo PC790ST is 0.4 - 2.0 litre per 100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.

Representative trials should be conducted to determine the optimum dosage of Supaflo PC790ST to meet the performance requirements by using the materials and conditions in actual use.

Supaflo PC790ST complies with ASTM C494, Type E.