Cookie Consent by FreePrivacyPolicy.com

Flocrete SP90F

High range water reducing superplasticiser admixture

Flocrete SP90F is superplasticising admixture formulated from selected polymers specially designed to enable the water content of the concrete to perform more effectively.

This effect can be used to improve workability, to increase ultimate strengths or to facilitate a reduction in the cement content while sustaining mix properties.

Downloads
Flocrete SP90F.pdf
TDS
  • High strength increase with same cement content.
  • Earlier formwork stripping by increasing early strength.
  • Improved workability, reduces placing and compaction problems.
  • Cement saving without affecting concrete strength and workability.
  • Minimising segregation and bleeding problems by improving cohesion.
  • More durable concrete as a result of reduction in permeability and lower water to cement ratio.
  • Low water cement ratio, high strength concrete.
  • To accelerate early strength development.
  • To produce high quality concrete of improved durability and after tightness.
  • Precast concrete.
  • For concrete floor mixes in which mechanical troweling will be used.

Flocrete SP90F is available in 25 litre jerrycan, 210 litre drums and 1000 litre bulks supply.

Flocrete SP90F has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.

The recommended dosage of Flocrete SP90F is 0.80 - 2.80 litre per 100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.

Representative trials should be conducted to determine the optimum dosage of Flocrete SP90F to meet the performance requirements by using the materials and conditions in actual use.

Flocrete SP90F complies with ASTM C494, Type A and F and BS 5075, Part 3.