Hyperplast PC185
High range water reducing admixture with workability retention properties
Hyperplast PC185 is a high performance super plasticising admixture based on polycarboxylic polymers with long chains specially designed to enable the water content of the concrete to perform more effectively.
This effect can be used in high strength concrete and flowable concrete mixes, to achieve highest concrete durability and performance.
- Optimises cement utilisation.
- Higher early and ultimate compressive strengths.
- Increases durability and resistance to aggressive atmospheric conditions thorough reduced permeability.
- High density and impermeable concrete through very high water reduction.
- Minimises segregation and bleeding problems by improving cohesion.
- Improves shrinkage and creep behaviours.
- Structures with congested reinforcement.
- High strength and high performance concrete.
- Improved cohesion allows for use in mass concrete pours and piling.
Hyperplast PC185 is available in 25 liters pails, 210 liters drums and 1000 liters bulks supply.
Hyperplast PC185 shelf life is 12 months if stored at temperatures between 2°C and 50°C.
The guidance dosage of Hyperplast PC185 is 0.40 - 2.50 liters/ 100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.
Representative trials should be conducted to determine the optimum dosage of Hyperplast PC185 to meet the performance requirements by using the materials and conditions in actual use.
Hyperplast PC185 complies with ASTM C494, Type F & G, depending on dosage used.
