Hyperplast PC607
High range water reducing and retarding admixture based on polycarboxylic polymers
Hyperplast PC607 is a high-performance super plasticising admixture based on polycarboxylic polymers with long
chains specially designed to enable the water content of the concrete to perform more effectively. Hyperplast PC607 combines the properties of high water reduction and extended workability retaining, this effect can be used in high strength, low W/C ratio and flowable concrete mixes with extended workability to achieve the highest concrete durability and performance in the ready-mix and precast concrete industries.
- Optimises cement utilization.
- Improves shrinkage and creep behaviors.
- High density and impermeable concrete through very high water reduction.
- Increases durability and resistance to aggressive atmospheric conditions thorough reduced permeability.
- Minimizes segregation and bleeding problems by improving cohesion.
- Higher early and ultimate compressive strengths.
- High strength and high performance concrete.
- Production of concrete with improved workability retention.
- Pre-cast concrete.
- Improved cohesion allow for use in mass concrete pours and piling.
- High durability concrete.
- Structures with congested reinforcement.
- For high levels concrete pumping.
- Self compacting concrete.
Hyperplast PC607 is available in 25 litre jerrycan, 210 litre drums and 1000 litre bulks supply.
Hyperplast PC607 has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C
and 50°C.
The recommended dosage of Hyperplast PC607 is 0.5 - 2.0 liters per 100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.
Representative trials should be conducted to determine the optimum dosage of Hyperplast PC607 to meet the
performance requirements by using the materials and conditions in actual use.
Hyperplast PC607 complies with BS EN 934-2:1998 and ASTM C494, Type G.
