Cookie Consent by FreePrivacyPolicy.com

Repcoat

One component water based acrylic elastomeric protective anti carbonation coating system

Repcoat is a high build elastomeric, microporous coating exhibiting excellent resistance to attack from carbon dioxide, airborne chlorides and acid rain, with exceptional weathering resistance.
Repcoat has excellent crack bridging properties, yet provides a smooth protective, decorative coating for concrete and other masonry surfaces. For effective anti-carbonation protection a two-coat treatment is recommended after the application of the silane siloxane based impregnating primer. The product is formulated to give a tough flexible and coloured coating which will give a waterproofing coating to a wide variety of substrates. A textured finish may be obtained if required.

Downloads
Repcoat_TDS_3.pdf
TDS
Repcoat_MSDS_4.pdf
SDS
Repcoat_MS_0.pdf
MS
  • High build elastomeric, microporous coating.
  • Excellent resistance to carbon dioxide, airborne, chlorides and water borne.
  • Exceptional weathering resistance.
  • Excellent crack bridging properties.
  • Protective and decorative coating.
  • Excellent waterproofing characteristics.
  • Bridge abutments.
  • External concrete surfaces of storage tank and masonry surfaces.
  • Multistory building and villas.
  • Where a high external tough coating is required.
  • Concrete cladding.

Repcoat: 0.38 litre/m² per coat to achieve 200 microns dry film thickness.
Repcoat Pimer: 0.1 - 0.2 litre/m², depending on the substrate porosity.

Repcoat is available in 5, 18 and 120 litre drums.
Repcoat Primer is available in 5, 20 and 200 litre drums.

Repcoat should be stored under dry warehouse conditions at temperatures between 10°C and 35°C.
Repcoat and Repcoat Primer have a shelf life of 12 months from date of manufacture if stored in proper conditions and sealed drums.

Repcoat complies with the requirements of EN 1504-2 Surface Protection Systems Principles 1.3, 2.2 and 8.2.