SetCure 100
Easy to clean curing aid for concrete surfaces
SetCure 100 is a liquid curing aid formulated from inorganic silicates.
SetCure 100 provides an excellent initial cure for concrete, then it begins to break down and naturally wear away from the surface to prepare concrete for coating with a multitude of protective and/or decorative top coats.
- Easy to clean up, only needs a simple wash with clean water after surface application to prepare for covering or sealing.
- Contibutes to the enhancement of the compressive strength of concrete at all ages.
- Single component.
- Easy application.
- Reduces efflorecence.
- Chloride-free.
- Maintains the anti-static characteristics of the concrete surface.
SetCure100 is recommended for new formwork cast-in-situ concrete surfaces such as concrete walls, columns and for concrete floors.
Typical applications include:
- Industrial plants.
- Factories.
- Warehouses.
- Garages.
- Shopping malls.
- Service stations.
- Parking lots and driveways.
The coverage is 4 - 7 m²/ litre per coat.
Where two coats are required to ensure maximum densification; the second coat should be applied after 2 - 3 hours of applying the first coat.
SetCure 100 is available in 25 litre pails and 200 litre drums.
SetCure 100 has a shelf life of 12 months from date of manufacture if stored in proper conditions and un-opened packs. Store in a dry area out of direct sunlight at temperatures between 5°C and 35°C.
