Cookie Consent by FreePrivacyPolicy.com

Flo-Grout EP215

High strength pourable epoxy resin grout

Flo-Grout EP215 is a three component, high strength, free flowing, epoxy resin grout. Flo-Grout EP215 is suitable for grouting gaps with thicknesses between 10 – 150 mm at ambient temperatures between 10 - 40oC.

Downloads
Flo-Grout EP215_TDS.pdf
TDS
Flo-Grout EP215 - Base_MSDS.pdf
SDS_Base
Flo-Grout EP215 - Filler_MSDS.pdf
SDS_Filler
Flo-Grout EP215 - Hardener_MSDS.pdf
SDS_Hardener
Flo-Grout EP215_MS.pdf
MS
  • Resistant to dynamic loading.
  • Non-shrink and low creep characteristics under continuous loading.
  • Exceptionally high compressive, flexural and tensile strengths.
  • Extremely dense.
  • Exceptional bond to concrete and steel surfaces.
  • Good chemical resistance.
  • High early strength development allowing for rapid installation.

Flo-Grout EP215 is ideally designed for use in the following applications:

  • Machine base plates.
  • Heavy crane rails.
  • Pile top waterproofing.
  • Bearing plinths.
  • High speed turbines.
  • Grouting areas where occasional chemical spillage may occur.

Flo-Grout EP215 is available in 20 kg, 30 kg and 100 kg packs.

Flo-Grout EP215 has a shelf life of 12 months from date of manufacture if stored at temperatures between 5°C and 35°C.

Approximately 10 litre per 20 kg pack, 15 litre per 30 kg pack and 50 litre per 100 kg pack.