Cookie Consent by FreePrivacyPolicy.com

Flo-Grout HFR

High flow non-shrink cementitious precision grout

Flo-Grout HFR is a cementitious, pre-mixed, pre-packed chloride and hydrogen free, high flow, pourable grout. It contains cement, selected additives, well graded and nonreactive aggregates and is designed to give excellent flow properties, shrinkage compensation, frost resistance, and high compressive strength.

Downloads
Flo-Grout HFR_TDS_2.pdf
TDS
Flo-Grout HFR_MSDS.pdf
SDS
Flo-Grout HFR_MS.pdf
MS
  • Non-shrink grout that has dual expansion properties to compensate for shrinkage in both the plastic and hardened stages.
  • Extremely dense and low permeability.
  • High early strength development allowing for rapid installation.
  • High flow can be poured or pumped into variable gap widths down to 10 mm.
  • Easy to apply, single component which require only addition of water.
  • Hydrogen and chloride free.

Flo-Grout HFR is ideally designed for use in the following applications:

  • Machine beds.
  • Bridge bearing pads and plinths.
  • Pile cap re-profi ling.
  • Under machinery base plates, crane rails, stanchion plates etc.
  • Anchoring of tie bars, bolts, and stressing cables.
  • Underpinning.

Flo-Grout HFR is available in 25 kg bags.

Flo-Grout HFR has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.

Approximately 13 – 13.5 litre/25 kg bag depending on consistency.

Flo-Grout HFR complies with U.S. Corps of Engineers Specifications CRD–C621-82A and ASTM C1107, Grade C.