Cookie Consent by FreePrivacyPolicy.com

Flocrete SP5000S

High range water reducing superplasticiser admixture specially designed for precast concrete

Flocrete SP5000S is superplasticising admixture formulated from selected polymers specially designed to enable the water content of the concrete to perform more effectively with higher developed early strength, this effect can be used to improve workability, to increase ultimate strengths or to facilitate a reduction in the cement content while sustaining mix properties. Flocrete SP5000S is chloride free.

Downloads
Flocrete SP5000S_TDS.pdf
TDS
Flocrete SP5000S_MSDS.pdf
SDS

Flocrete SP5000S provides for the following:

  • Improved workability without increased water content.
  • High reduction in water without loss of workability.
  • Improved early and long term strengths.
  • Chloride free - does not attack reinforcement.

Flocrete SP5000S is recommended for use in conditions such as:

  • Low water cements ratios.
  • To produce high quality concrete of improved durability and water tightness.
  • Pre-cast concrete.
  • Early concrete strength requirements.
  • High strength concrete.

Flocrete SP5000S is available in 25 litre pails, 210 litre drums, and 1000 litre bulks supply.

Store in dry conditions. Flocrete SP5000S has a minimum shelf life of 12 months from date of manufacture if stored properly in its original unopened packing.

Dosage of Flocrete SP5000S will vary depending on cement content and outside temperature. Required dosage should be determined for each case.
Typical dosage is between 1 - 3% of cement content. Dosages outside the typical range given above may be used to meet particular requirements.

Flocrete SP5000S complies with the following specifications:

  • EN934-2.
  • BS5075.
  • ASTM C494, Type C and E.