Hyperplast ES270
High performance early strength concrete superplasticiser (Formerly known as Flocrete PC270)
Hyperplast ES270 is a high performance early strength concrete super plasticising admixture based on polycarboxylic polymers with long chains specially
designed to enable the water content of the concrete to perform more effectively.
This effect can be used in high strength concrete and flowable concrete mixes, to achieve highest concrete durability and performance.
- Optimises cement utilization.
- High density and impermeable concrete through very high water reduction.
- Improves shrinkage and creep behaviors.
- Minimises segregation and bleeding problems by improving cohesion.
- Higher early and ultimate compressive strengths.
- Increases durability and resistance to aggressive atmospheric conditions thorough reduced permeability.
- High strength and high performance concrete.
- Structures with congested reinforcement.
- Pre-cast concrete.
- Improved cohesion allow for use in mass concrete pours and piling.
- Self compacting concrete.
Hyperplast ES270 is available in 25 litre pails, 210 litre drums and 1000 litre bulks supply.
Hyperplast ES270 has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.
The guidance dosage of Hyperplast ES270 is 0.5 - 3.0 litre/100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.
Representative trials should be conducted to determine the optimum dosage of Hyperplast ES270 to meet the performance requirements by using the materials and conditions in actual use.
Hyperplast ES270 complies with ASTM C494, Type F and E, depending on dosage used.
