Keyfix AE100
Epoxy acrylate anchoring system
Keyfix AE100 is a styrene-free epoxy acrylate resin anchoring grout, supplied in a pre-packed cartridge system, designed to deliver fast curing and high strength anchoring for both high and medium loads, it also can be used for fixings in damp environments or with chemical exposure.
Keyfix AE100 is suitable for use with different types of substrates such as, solid and hollow masonry, hard natural stone, solid rock, voided stone or rock.
Downloads
Keyfix AE100.pdf
TDS
Keyfix AE100 - A.pdf
SDS_Base
Keyfix AE100 - B.pdf
SDS_Hardener
Keyfix AE100_MS.pdf
MS
- Suitable for dry, wet and flooded holes.
- Can be applied using standard sealant application gun.
- Exceptional rapid strength development.
- Styrene free.
- Resistant to dynamic loading.
- Exceptional bond to concrete and steel surfaces.
- High ultimate and early strengths.
- Low waste, reusable and easily recycled cartridge.
- Resistant to chemicals and damp conditions.
Keyfix AE100 is ideally designed for use in the following applications:
- Anchoring threaded rods and post installed rebars in masonry and uncracked concrete.
- Permanent installation of reinforcing and starter bars.
- Suspended ventilation systems.
- Safety barriers.
- Machinery and heavy machinery.
- Racking.
- Rolling cranes.
Keyfix AE100 is available in 300 ml (2 mixing nozzles included).
Keyfix AE100 has a shelf life of 12 months from date of manufacture if stored at temperature of 20°C.
Keyfix AE100 complies with the following standards:
- ETA for Threaded Rods & Rebar– Option 7.
- ETA for Hollow Wall/Masonry Installations.
- WRAS approved material for potable drinking water.
