Probuild BM110
Block and brick premixed laying mortar
Probuild BM110 is a polymer modified, ready to use interior and exterior block adhesive specially designed for use with blocks and bricks.
Probuild BM110 is composed of a blend of cement, sand, limestone, dry powder additives and selected polymers which when mixed with water produces a thixotropic mortar suitable for fixing all types of blocks and bricks, and to be used on the block walls for filling gaps.
Downloads
Probuild BM110_TDS_0.pdf
TDS
Probuild BM110_MSDS_0.pdf
SDS
Probuild BM110_MS_0.pdf
MS
- Water resistant, will not be affected in wet areas.
- Low permeability to water.
- Ready for use, just requires the addition of water.
- Non sag, good consistency.
- High bond strength.
- Suitable for internal and external application.
- Shrinkage controlled, polymer modified cementitious mortar.
- Complies with the LEED requirements for VOC.
- For permanent fixing of all types of blocks and bricks.
- Can be used internally and externally.
Probuild BM110 is available in 25 and 50 kg bags.
Probuild BM110 has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 45°C in dry conditions.
Approximately 14 litres per 25 kg bag.
Probuild BM110 complies with the requirements of ASTM C387, C1714, C270 Type S, N and O.