Cookie Consent by FreePrivacyPolicy.com

Probuild PF200

Ready to use acrylic pinhole filler and smooth finishing paste

Probuild PF200 is a ready to use high performance acrylic coat specially designed to level surfaces and fill pinholes prior to the application of protective coatings.

Downloads
Probuild PF200_TDS_1.pdf
TDS
Probuild PF200.pdf
MS
Probuild PF200_MSDS_7.pdf
SDS
  • Excellent adhesion to the substrates.
  • Can be applied on vertical and horizontal surfaces.
  • Easy to apply, ready to use single component.
  • Suitable drying time.
  • Environmentally friendly, water based material.
  • Probuild PF200 is designed to be used in conjunction with Repcoat to completely fill pinholes and irregular surfaces to produce a smooth even finish.
  • Probuild PF200 can also be applied over other existing coats at internal and external areas. However, it is always recommended to conduct adhesion tests to ensure the compatibility of Probuild PF200 and the coated surface.

For more information, please refer to the Technical Department in DCP.

Approximately 1.70 kg/m² at 1 mm thickness.

Probuild PF200 is available in 5 and 25 kg packs.

Keep tightly sealed, store under cover in a dry area at room temperature, protect from freezing, exposure to extreme heat and direct sunlight.
Probuild PF200 has a shelf life of 12 months from date of manufacturing if stored in original unopened packaging.