Repelicone K
Water repellent impregnation based on water borne silicone
Repelicone K is a transparent, ready for use, single component, water based silicone used to impart water repellency for mineral construction materials.
Downloads
Repelicone K_TDS_0.pdf
TDS
Repelicone K_3.pdf
SDS
- Good penetration into substrate.
- Provides excellent water repellency to a wide variety of substrates.
- Excellent reduction of water intrusion.
- Excellent resistance to UV light.
- Increases considerably freeze thaw resistance.
- Minimizes efflorescence.
- Breathable, allows for water vapour release.
- Very good resistance to dust and dirt pick-up.
- Repelicone K provides outstanding early water repellency and protection from weathering to natural stones, clays, terracotta, bricks, sandstone, limestone, aerated concrete, insulating materials, gypsum and gypsum-based fibre boards.
- Repelicone K is also suitable to be applied immediately on manufactured low-fired clay products such as roof tiles, floor tiles, and flower pots.
0.1 - 0.4 litre per m² depends on the porosity of the substrate.
Repelicone K is available in 20 litre plastic pails and 200 litre plastic drums.
Repelicone K should be stored under cover at a minimum ambient temperature of 5°C.
Repelicone K has a shelf life of 18 months from date of manufacture if stored in proper conditions and sealed drums.
