Strongcoat Conductive
Flow-applied electrostatic discharge (ESD) epoxy coating
Strongcoat Conductive is a flow applied solvent free, electrostatic conductive epoxy floor coating especially designed to provide electrostatic control properties to a variety of substrates in wide range of applications.
Strongcoat Conductive comprises of an epoxy primer, conductive base coat and 2.0 mm flow applied topcoat.
- Provide a conductive floor for static electricity to pass through to earth controlling static electricity.
- Provide anti-spark (spark-proof) whenever required for safety to prevent sparks.
- Alternative smooth finish.
- Hard wearing surface that can be subjected to heavy foot traffic and forklift traffic.
- Chemical resistant.
Strongcoat Conductive is suitable for use in areas where a static conductive floor is required, such as:
- Electronic manufacturing facilities.
- Hospital operation theatres.
- Hazardous dust and chemical environments.
- Data processing areas.
- Military and aerospace facilities.
Strongcoat Primer: 5 m2/kg @ 200 micron DFT.
Strongcoat Conductive Top Coat: 3.2 kg/m2 @ 2 mm DFT.
Strongcoat Conductive Base Coat: 7.5 m2/kg @ 125 micron DFT.
Actual coverage can vary depending on the substrate conditions.
Strongcoat Primer: 5 kg packs.
Strongcoat Conductive Top Coat: 15 kg packs.
Strongcoat Conductive Base Coat: 5 kg packs.
Strongcoat Conductive has a shelf life of 12 months from date of manufacture if stored at temperatures between 5°C and 30°C.
When applied in accordance with the below stated instruction, Strongcoat Conductive is designed to fulfill the requirements of the following standards:
- ASTM F150 for conductive flooring range.
- ANSI/ESD S20.20.
- DoD 4145.26-M “Contractor's Safety Manual for Ammunition and Explosives”.
