Bituproof 320
Water based elastomeric high build latex rubberised bitumen coating
Bituproof 320 is a dark brown emulsified bitumen liquid reinforced with latex rubber, formulated from selected raw materials to form a high build elastomeric waterproof and protective coating for concrete and masonry.
Downloads
Bituproof 320_6.pdf
TDS
Bituproof 320_MSDS_6.pdf
SDS
Bituproof 320_MS_1.pdf
MS
- Elastomeric will bridge minor cracks which may occur in concrete substrates.
- Resists attack by chloride and sulphate ions present in ground water.
- Single component.
- Applied by brush which make it easy to use.
- Economical.
- Solvent free, non flammable.
- Asbestos free.
- Rot resistant.
Bituproof 320 provides a waterproofing and protective coating for:
- Retaining walls.
- Shaded or tiled roofs.
- Underground concrete foundations.
- Wet floor areas such as bathrooms and kitchens.
- Where minor live cracks may occur in concrete substrates, Bituproof 320 will bridge such minor cracks.
- Basement walls.
- Concrete slabs.
- Suitable for use as curing compound for fresh concrete.
- Bituproof 320 can be used as protective coating for normal and galvanized steel plates.
Coverage rate depends on surface roughness and the method of application.
- 3 - 5 m²/litre per coat, as protective coating.
- 1 - 1.5 m²/litre per coat, as water proof coating giving a dry film thickness of 500 microns per coat. Two coats recommended.
Bituproof 320 is available in 18 and 200 litre drums.
Store away from direct sunlight, and protect from freezing.
Bituproof 320 has a shelf life of 12 months from date of manufacture if stored in proper conditions.
- Bituproof 320 complies with ASTM D1227, Type III, Class 1.
- Bituproof 320 complies with ASTM C309 as a curing compound when applied with two coats at a rate of 4 m²/litre per coat.
- Bituproof 320 complies with ASTM D3747, Type I and II.
