Repcoat Primer
Silane/siloxane based hydrophobic primer
Repcoat Primer is a penetrating and film forming hydrophobic silane/siloxane based primer. It is used as a primer for Repcoat acrylic based protective coating. When applied, it reacts with concrete and masonry surfaces producing a clear hydrophobic barrier that prevents the passage of water and hence protects exposed reinforced concrete structures from attack by chloride ions.
Downloads
Repcoat Primer_TDS_1.pdf
TDS
Repcoat Primer_MSDS_1.pdf
SDS
- Deep penetration into substrate.
- Very good reduction of water and chloride intrusion.
- Breathable, allows for water vapour release.
0.1 - 0.2 litre/m², depending on the substrate porosity.
Repcoat primer is available in 5, 20 and 200 litre drums.
Repcoat Primer should be stored under cover at an ambient temperature range of 10°C and 25°C.
Repcoat Primer has a shelf life of 12 months from date of manufacture if stored in proper conditions and sealed drums.