سترونغ كوت كوندكتيف
Epoxy resin system with conductive properties for floors and antistatic dissipative properties for walls
Strongcoat Conductive provides a self leveling, flow-applied 2 mm thick epoxy resin floor topping with conductive properties, as well as electrostatic discharge material wall coating with anti-static properties.
The system comprises of an epoxy primer (Strongcoat Primer), highly conductive epoxy base coat (Strongcoat Conductive Base Coat) and epoxy top coat available in two grades; horizontal grade for floor applications (Strongcoat Conductive Top Coat F) and vertical grade for wall applications (Strongcoat Conductive Top Coat W).
- Provide a conductive floor for static electricity to pass through to earth controlling static electricity.
- Provides anti-spark (spark-proof) whenever required for safety to prevent sparks.
- Alternative smooth finish.
- Hard wearing surface that can be subjected to heavy foot traffic and forklift traffic.
- Chemical resistant.
Strongcoat Conductive flooring system has a resistance between 5 x 104 and 1 x 106 ohms. Strongcoat Conductive is suitable for use in areas where a static conductive floor is required, such as:
- Electronic manufacturing facilities.
- Hospital operation theatres.
- Hazardous dust and chemical environments.
Strongcoat Primer: 5 m2/kg @ 200 micron DFT.
Strongcoat Conductive Top Coat F: 3.2 kg/m2 @ 2 mm DFT.
Strongcoat Conductive Top Coat W: 6 m2/kg @ 70 micron DFT.
Strongcoat Conductive Base Coat: 7.5 m2/kg @ 125 micron WFT.
Actual coverage can vary depending on the substrate conditions.
Strongcoat Primer: 5 kg packs.
Strongcoat Conductive Top Coat F: 15 kg packs.
Strongcoat Conductive Top Coat W: 5 & 20 kg packs.
Strongcoat Conductive Base Coat: 5 kg packs.
Strongcoat Conductive has a shelf life of 12 months from date of manufacture if stored at temperatures between 10oC and 35oC.
The material may form crystals when stored at temperatures below 10oC, in such cases, conditioning for 1 - 2 days at temperatures between 30 - 35oC with simple manual mixing is needed before application