Hyperplast PC246
High performance polycarboxylic ether based superplasticiser
Hyperplast PC246 is a high performance superplasticising admixture based on polycarboxylic ether polymers with long chains specially designed to enable the water content of the concrete to perform more effectively.
This effect can be used in high strength concrete and flowable concrete mixes, to achieve highest concrete durability and performance.
- Optimises cement utilization.
- Improves shrinkage and creep behaviors.
- High density and impermeable concrete through very high water reduction.
- Higher early and ultimate compressive strengths.
- Minimizes segregation and bleeding problems by improving cohesion.
- Increases durability and resistance to aggressive atmospheric conditions thorough reduced permeability.
- High strength and high performance concrete.
- Structures with congested reinforcement.
- Improved cohesion allow for use in mass concrete pours and piling.
Hyperplast PC246 is available in 25 litre jerrycan, 210 litre drums and 1000 litre bulks supply.
Hyperplast PC246 shelf life is 12 months if stored at temperatures between 2°C and 50°C.
The guidance dosage of Hyperplast PC246 is 0.50 - 2.45 litre per 100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.
Representative trials should be conducted to determine he optimum dosage of Hyperplast PC246 to meet the performance requirements by using the materials and conditions in actual use.
Hyperplast PC246 complies with ASTM C494, Type A, F & G, depending on the used dosage.