Cookie Consent by FreePrivacyPolicy.com

Hyperplast PC520

High performance polycarboxylic ether based superplasticiser

Hyperplast PC520 is a high performance superplasticising admixture based on polycarboxylic ether polymers with long chains specially designed to enable the water content of the concrete to perform more effectively. This effect can be used in high strength concrete and flowable concrete mixes, to achieve highest concrete durability and performance.

Downloads
Hyperplast PC520.pdf
TDS
  • Optimises cement utilization. 
  • Improves shrinkage and creep behaviors. 
  • High density and impermeable concrete through very high water reduction. 
  • Higher early and ultimate compressive strengths. 
  • Minimizes segregation and bleeding problems by improving cohesion. 
  • Increases durability and resistance to aggressive atmospheric conditions thorough reduced permeability.
  • High strength and high performance concrete. 
  • Structures with congested reinforcement. 
  • Improved cohesion allow for use in mass concrete pours and piling.

Hyperplast PC520 is available in 25 litre jerrycan, 210 litre drums and 1000 litre bulks supply.

Hyperplast PC520 has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.

The recommended dosage of Hyperplast PC520 is 0.5 - 3.0 litre per 100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica. 

Representative trials should be conducted to determine the optimum dosage of Hyperplast PC520 to meet the performance requirements by using the materials and conditions in actual use.

Hyperplast PC520 complies with ASTM C494 , Type F and G depending on dosage used.