Hyperplast PC600*
High performance polycarboxilic based, concrete superplasticiser
Hyperplast PC600* is a high performance super plasticising admixture based on polycarboxylic polymers with long chains specially designed to enable the water content of the concrete to perform more effectively.
This effect can be used in high strength, low W/C ratio and flowable concrete mixes, to achieve highest concrete durability and performance in the readymix and precast concrete industries.
- Optimises cement utilization.
- Improves shrinkage and creep behaviors.
- High density and impermeable concrete through very high water reduction.
- Increases durability and resistance to aggressive atmospheric conditions thorough reduced permeability.
- Minimizes segregation and bleeding problems by improving cohesion.
- Higher early and ultimate compressive strengths.
- High strength and high performance concrete.
- Pre-cast concrete.
- Improved cohesion allow for use in mass concrete pours and piling.
- High durability concrete.
- Structures with congested reinforcement.
- For high levels concrete pumping.
- Self compacting concrete.
Hyperplast PC600* is available in 25 litre pails, 210 litre drums and 1000 litre bulks supply.
Hyperplast PC600* has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.
The recommended dosage of Hyperplast PC600* is 0.5 - 2.5 liters per 100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.
Representative trials should be conducted to determine the optimum dosage of Hyperplast PC600* to meet the performance requirements by using the materials and conditions in actual use.
Hyperplast PC600* complies with BS EN934-2:1998 and ASTM C494, Type G.
