Hyperplast PC602
High performance polycarboxilic based, concrete superplasticiser
Hyperplast PC602 is a high performance super plasticising admixture based on polycarboxylic polymers with long chains specially designed to enable the water content of the concrete to perform more effectively.
This effect can be used in high strength, low W/C ratio and flowable concrete mixes, to achieve highest concrete durability and performance in the readymix and precast concrete industries.
- Optimises cement utilization.
- Improves shrinkage and creep behaviors.
- High density and impermeable concrete through very high water reduction.
- Increases durability and resistance to aggressive atmospheric conditions thorough reduced permeability.
- Minimizes segregation and bleeding problems by improving cohesion.
- Higher early and ultimate compressive strengths.
- High strength and high performance concrete.
- Pre-cast concrete.
- Improved cohesion allow for use in mass concrete pours and piling.
- High durability concrete.
- Structures with congested reinforcement.
- For high levels concrete pumping.
- Self compacting concrete.
Hyperplast PC602 is available in 25 litre pails, 210 litre drums and 1000 litre bulks supply.
Hyperplast PC602 has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.
The recommended dosage of Hyperplast PC602 is 0.5 - 2.5 litre per 100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.
Representative trials should be conducted to determine the optimum dosage of Hyperplast PC602 to meet the performance requirements by using the materials and conditions in actual use.
Hyperplast PC602 complies with BS 5075, Part 3 and with ASTM C494 as Type F and G, depending on dosage used.
