Setseal AW90
Multipurpose water based acrylic, concrete curing compound
Setseal AW90 is a single component, water-based acrylic curing compound designed to impregnate concrete surfaces combining the benefits of a curing compound and hardener.
Setseal AW90 is designed to overcome drawbacks of many commonly used curing membranes that tend to provide a limited service life following the curing period of new concrete. It has good abrasion resistance and is compatible with several types of coatings.
- Recoatable.
- Non-degradable, single component.
- Enhanced concrete durability.
- Increase the surface abrasion.
- UV resistance.
- Helps achieve concrete desired strengths.
- Minimizes potential surface cracking and shrinkage.
- Promotes a harder dust free surface.
- Can be spray applied to reduce labor cost.
- Non toxic.
Setseal AW90 is mainly used for newly cast concrete and cementitious surfaces that contain GGBFS, PFA, microsilica, dry shake hardeners or limestone to retain sufficient moisture to ensure full hydration of the cement.
Typical application areas include:
- High rise construction to eliminate water curing.
- Runways and roads.
- Roof decks.
- Retaining walls.
- Irrigation canals.
- General floor slab and columns.
The recommended coverage rate is 3 - 5 m²/litre.
Setseal AW90 is available in 25 litre jerrycan and 200 litre drums.
Store in a dry area out of direct sunlight between 5oC and 35oC.
Setseal AW90 has a shelf life of 12 months from date of manufacture if stored in proper conditions in un-opened drums.
Setseal AW90 complies with ASTM C309, Type I and II, Class A and B when applied at a coverage rate up to 4 m²/litre and AASHTO M-148.
