Strongcoat PSE
Chemical resistant epoxy polysulphide flexible coating
Strongcoat PSE is a two component, flexible, high solids, epoxy polysulphide resin coating designed to provide good UV, abrasion and weather resistance. Strongcoat PSE has outstanding chemical and mechanical properties to protect concrete and steel from aggresive environment or wide
range of chemicals.
- Produces a seamless membrane that is both easy to clean and does not induce bacterial and fungal growth.
- Excellent resistance to a variety of chemicals, oils and fuel.
- Excellent abrasion and impact resistance.
- UV and weather resistant.
- Flexible; able to bridge cracks up to 1 mm.
- Easy to apply by brush, roller, or airless spray.
- Excellent adhesion without the need for a primer.
Strongcoat PSE is designed for variety of applications such as:
- Heavy duty protective and waterproof coating for concrete and steel.
- Heavy duty wall and floor coating in food processing plants, grain silos, dairies, breweries.
- Car parks.
- Suitable for use in reservoirs containing sewage sludge, chemical, oils and fuel.
- Roofing applications.
- Sub-structural waterproofing.
Approximately 0.75 kg/m² per 500 microns DFT per 2 coats. Higher thicknesses can be achieved with either multiple application or by using airless spray machines.
Strongcoat PSE is available in 30 kg packs (20.6 litres).
Store in a dry area out of direct sunlight at temperatures between 5oC and 35oC.
Strongcoat PSE has a shelf life of 12 months if stored in dry conditions at room temperature in original unopened Packs.
