Strongcoat OT DPM
Oil-tolerant, epoxy damp-proof membrane
Strongcoat OT DPM is a two pack, solvent free, oil-tolerant epoxy based damp-proof membrane for use with the DCP range of surface coatings and toppings.
Strongcoat OT DPM is intended to enhance the bond between coatings or screed systems and substrates that have been previously exposed to hydrocarbon oils such as petroleum products and their derivatives, motor oil, and solvents but have undergone proper cleaning.
Additionally, it suppresses residual construction moisture and rising dampness in concrete and sand/cement screeds and can be used in situations where the relative humidity level is above 75%. It is applied by brush or roller in one or two coats depending on the relative humidity of the floor.
Strongcoat OT DPM is applied at a coverage rate of 3.5 - 3.7 m²/kg to achieve approximately 200 micron DFT per coat.
Strongcoat OT DPM is available in 10 kg and 20 kg packs.
Strongcoat OT DPM has a shelf life of 12 months from date of manufacture if stored at temperatures between 5°C and 30°C.
