Strongcoat DPM
Epoxy damp-proof membrane
Strongcoat DPM is a two pack, solvent free, epoxy based damp-proof membrane for use with the DCP range of surface coatings and toppings.
Strongcoat DPM suppresses residual construction moisture and rising dampness in concrete and sand/cement screeds and can be used in situations where the relative humidity level is above 75%. It is applied by brush or roller in one or two coats depending on the relative humidity of the floor
Downloads
Strongcoat DPM_TDS_5.pdf
TDS
Strongcoat DPM Base_MSDS_2.pdf
SDS_Base
Strongcoat DPM Hardener_MSDS_3.pdf
SDS_Hardener
DECLARATION OF PERFORMANCE_STRONGCOAT DPM 024A.pdf
DoP
Strongcoat DPM is applied at a coverage rate of 3.5 - 3.7 m²/kg to achieve approximately 200 micron DFT per coat.
Strongcoat DPM is available in 5 kg, 10 kg and 20 kg packs.
Strongcoat DPM has a shelf life of 12 months from date of manufacture if stored at temperatures between 5oC and 30oC.
