Cookie Consent by FreePrivacyPolicy.com

Setseal 6

Acrylic concrete curing membrane and sealer

Setseal 6 is a single component, ready to use acrylic resin based concrete curing compound designed to impregnate concrete surfaces, combining the benefits of a curing aid, dust–sealer and hardener.

Setseal 6 produces a thin membrane to the concrete surface, which protects the construction from rapid evaporation, making it less prone to crack. 

Setseal 6 impregnates into the concrete surface and seals micro cracks, aiding to create a dust–free concrete surface with minimum maintenance requirements. Setseal 6 increases surface abrasion and resistance to dirt, water, oils, and other chemicals.

Rapid evaporation increases surface tensions – a common reason for surface flaking and cracks in the concrete floor. Escaped water increases the amount of unreacted cement, leading to surfaced efflorescence and reduced compressive strength of the construction.

Setseal 6 is used with dry shake floor hardeners Monoshake and TIBMIX range to construct high quality dust–free and abrasion resistant industrial concrete floors. Setseal 6 can also be used to cure plain concrete.

Downloads
Setseal 6_TDS_6.pdf
TDS
Setseal 6_24.pdf
SDS
Coverage

The recommended coverage rate for Setseal 6 is 5 to 10 m²/liter per coat, depending on substrate quality, absorption and material loss

Packaging

Setseal 6 is available in 5 litre, 10 litre and 25 litre containers and 200 litre drums.

Storage

Setseal 6 has a shelf life of 12 months from date of manufacture if stored in dry areas out of direct sunlight and temperatures between 5oC and 35oC.

Standards

Setseal 6 complies with EN 1504-2, Principles 1.2 and 5.2.