Strongcoat PAS-500
Polyaspartic aliphatic flooring System
Strongcoat PAS-500 is a two-component, high performance, solvent free, rapid curing flooring product based on the latest polyaspartic / polurea technologies. Strongcoat PAS-500 provides excellent colour and gloss retention and is resistant to most fuels, oils, solvents and cleaners.
Strongcoat PAS-500 can be rapidly and consistently applied using airless spray, low pressure plural component, roller, squeegee or notched trowel application.
With a tack free time of approx. 60 min re-use times are incredibly short saving customers valuable production time.
- Excellent colour and gloss retention.
- Excellent abrasion resistance.
- Excellent working time.
- Excellent adhesion to concrete substrates.
- Excellent chemical resistance.
- Resistant to most chemicals, solvents, acids and caustics.
- Can be used for in-door and outdoor applications.
- Stable over a wide temperature range.
- Displays good flexibility and impact resistance compared to standard epoxies.
- Excellent for grind and seal applications.
- Cures to a very clear finish when not pigmented.
Strongcoat PAS-500 is used as protective, decorative, high chemical resistance and hard wearing floor coating system for a wide range of applications including:
- Concrete garage floors, and walkways.
- Car park decks.
- Warehouse flooring.
- Automotive sales and service areas.
- Aircraft hangers.
- Restaurants kitchens and dining areas.
- Retail shops and shopping malls.
- Hospital flooring.
Approximately 0.25 ltr/m2 to achieve a DFT of 250 μm per coat. However, coverage may vary depending on the substrate and surface porosity.
Strongcoat PAS-500 is available in 20 x 20 litre buckets and 200 x 200 Litre drums.
When stored in dry conditions out of direct sunlight in original unopened packaging, this product has a shelf life of approximately 12 months from the date of manufacture. Avoid storing product in temperatures above 35oC as this may reduce the products shelf life.
Drums, including empty drums should always be kept tightly sealed. During storage and processing, avoid any contamination with other liquids and moist air which may cause solids to form leading to blockages in filters, pumps and/or pipelines.
