Formcoat F200
Premium oil-based, diesel free form release agent
Formcoat F200 Formcoat F200 is a premium ready for use, diesel-free, VOC compliant, oil-based concrete form release agent.
It effectively prevents the bonding of concrete to most types of formwork ensuring high quality, fair faced and stain free concrete with excellent surface finish.
- Easy release, reduces damage to concrete surface and improves finish.
- Minimizes surface blemishes and staining.
- Improves fair-faced concrete quality.
- Helps reduce dusting of concrete.
- Reduces opportunity of damage to formwork.
- Extends formwork usable life.
- Minimizes cleaning of formwork before re-use.
- Inhibits corrosion of steel formwork.
- VOC compliant.
Formcoat F200 is used as a release agent for most types of formwork including plywood, steel, aluminum, plastic and treated paper forms, allowing for easy stripping of formwork and improving concrete finish.
Steel, plastic, fiber glass, high density plywood:
1,600 – 2,400 ft2/gal (40 – 60 m²/litre).
Striated plywood, timber wood:
1,000 - 1,400 ft2/gal (25 - 35 m²/litre).
Coverage rates depend on type, quality and absorption of formwork. Non-absorbent surfaces require a single application. New, unsealed, timber surfaces may need recoating if the first application is absorbed into the timber.
Formcoat F200 is available in 1 gal (3.8 liter), 5 gal (19 liter), 55 gal (208 liter), 275 gal (1,041 liter) containers.
Formcoat F200 should be stored under a shaded area at a minimum ambient temperature of 41°F (5°C).
Formcoat F200 has a shelf life of 12 months from date of manufacture if stored in proper conditions and sealed drums. The effectiveness of this product may be adversely affected if these conditions are exceeded and DCP Technical Department should be contacted for advice.
Compliant with all U.S and Canadian regulations for VOC of concrete form release agents, including Federal EPA, SCAQMD, OTC, LADCO & CARB.