Cookie Consent by

Repelicone W

Water repellent impregnation based on water borne Silane/Siloxane

Repelicone W is a water based, ready for use, single component, water repellent impregnation for application on vertical or steeply sloping concrete, mineral-based natural and artificial stone, cementitious substrates, mineral plasters and mineral paints.
Repelicone W once applied will 'bead' water and protect the substrate from water penetration.

Repelicone W_TDS_3.pdf
Repelicone W_SDS.pdf
  • Excellent water beading effect.
  • Good penetration into substrate.
  • Good reduction of water and chloride intrusion.
  • Excellent resistance to alkalis and UV light.
  • Increases freeze thaw resistance.
  • Minimizes efflorescence.
  • Breathable, allows for water vapour release.
  • Very good resistance to dust and dirt pick-up.
  • Repelicone W provides excellent water repellency and protection from weathering to vertical or steeply sloping concrete, mineral-based and artificial stone, cementitious substrates and mineral paints.
  • Repelicone W can also be used for injection into walls to prevent rising damp.
  • Repelicone W can be used as moisture barrier primer that is recoatable with water and solvent borne paints.

60 - 175 ft2/ gal (1.5 - 4.3 m2/liter) depending on the porosity of the substrate.

Repelicone W is available in 1 gal (3.8 litre) jerrycans, 5 gal (18.9 litre) pails and 55 gal (208.2 litre) drums.

Repelicone W has a shelf life of 12 months from date of manufacture if stored in proper conditions and sealed drums. Repelicone W should be stored under cover at a minimum ambient temperature of 41°F (5°C).

Repelicone W complies with the requirements of EN 1504-2 Surface Protection Systems for Hydrophobic Impregnation (H) Principles 1.1, 2.1 and 8.1.