Cookie Consent by FreePrivacyPolicy.com

Setseal 22

Water based concrete curing compound

Setseal 22 is a water based curing compound formulated from selected emulsified paraffin to form a low viscosity wax emulsion. Setseal 22 is supplied as clear and white pigmented colours, the clear colour is a white liquid, which forms a wet white film when applied to concrete surfaces, this dries to form a transparent film. The white pigment colour is a white milky liquid, which forms a white film after drying and reflect 60 – 80% of the sunlight providing the recommended coverage has been maintained.

The two grades are designed to retain sufficient moisture in the concrete to ensure full hydration of the cement, which is essential for optimum strength development.

Downloads
Setseal 22_MS.pdf
MS
Setseal 22_TDS_3.pdf
TDS
Setseal 22_MSDS_4.pdf
SDS
  • Helps achieving concrete desired strengths.
  • Minimizes potential surface cracking and shrinkage.
  • Promotes a harder dust free surface.
  • Single component.
  • Can be spray applied to reduce labor cost.

Setseal 22 is used mainly for newly cast concrete and cementitious surfaces to retain sufficient moisture to ensure full hydration of the cement.

Typical application areas include:

  • Runways and roads.
  • Roof decks.
  • Retaining walls.
  • Irrigation canals.
  • Concrete floors.
  • Columns and underground foundations.

The recommended coverage rate is 2.5 - 3.5 m²/litre.

Setseal 22 is available in 5, 20 and 200 litre containers.

Setseal 22 has a shelf life of 12 months from date of manufacture for the clear version, and 9 months for the pigmented, if stored in proper conditions in un-opened drums. Store in a dry area out of direct sunlight between 5°C and 35°C.

Setseal 22 is suitable for use in structures that will be in contact with potable water when tested in accordance with BS 6920.