Cookie Consent by FreePrivacyPolicy.com

Flocrete SP5000J

Cold weather concreting admixture

Flocrete SP5000J is a multi-component, high performance concrete additive in liquid form for producing high quality concrete at very low temperatures. Flocrete SP5000J is chloride free.

Downloads
Flocrete SP5000J_TDS.pdf
TDS
Flocrete SP5000J_MSDS_4.pdf
SDS

Flocrete SP5000J provides for the following:

  • Improved workability without increased water content.
  • High reduction in water without loss of workability.
  • Increased frost resistance.
  • Improved early and long term strengths.
  • Chloride free - does not attack reinforcement.

Flocrete SP5000J is recommended for use in conditions such as:

  • Concrete casting at low temperatures
  • Expected overnight frost.
  • Early concrete strength requirements
  • High strength concrete
  • Can be used as a sole additive to achieve required concrete performance at very low temperatures.

Flocrete SP5000J is available in 25 llitre pails, 210 litre drums, and 1000 litre bulks supply.

Store in dry conditions. Flocrete SP5000J has a minimum shelf life of 12 months from date of manufacture if stored properly in its original unopened packing.

Dosage of Flocrete SP5000J will vary depending on cement content and outside temperature. Required dosage should be determined for each case.
Typical dosage is between 1 - 2% of cement content.
Dosages outside the typical range given above may be used to meet particular requirements.
Consult Don Technical Department for further advice.

Flocrete SP5000J complies with the following specifications:

  • EN934-2.
  • BS5075.
  • ASTM C494, Type C and E.