Hyperplast PC175
High performance polycarboxylic based superplasticiser
Hyperplast PC175 is a high performance super plasticising admixture based on polycarboxylic polymers with long chains specially designed to enable the water content of the concrete to perform more effectively.
This effect can be used in high strength concrete and flowable concrete mixes, to achieve the highest concrete durability and performance, as well as maintaining the workability retention of fresh concrete mixes.
- Optimises cement utilization.
- High density and impermeable concrete through very high water reduction.
- Improves workability retention.
- Improves shrinkage and creep behaviors.
- Minimizes segregation and bleeding problems by improving cohesion.
- Higher early and ultimate compressive strengths.
- Increases durability and resistance to aggressive atmospheric conditions thorough reduced permeability.
- High strength and high performance concrete.
- Structures with congested reinforcement.
- Improved cohesion allow for use in mass concrete pours and piling.
- Suitable for long concrete deliveries.
Hyperplast PC175 is available in 25 liters jerrycan, 210 liters drums and 1000 liters bulks supply.
Hyperplast PC175 shelf life is 12 months if stored at temperatures between 2°C and 50°C.
The guidance dosage of Hyperplast PC175 is 0.40 - 2.50 liters per 100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.
Representative trials should be conducted to determine the optimum dosage of Hyperplast PC175 to meet the performance requirements by using the materials and conditions in actual use.
Hyperplast PC175 complies with ASTM C494, Type F & G, depending on dosage used.
