Hyperplast PC175 F1
High performance polycarboxylic based superplasticiser
Hyperplast PC175 F1 is a high performance super plasticising admixture based on polycarboxylic polymers with long chains specially designed to enable the water content of the concrete to perform more effectively as well as increasing the workability retention and cohesion of
fresh concrete mixes.
This effect can be used in high strength concrete and flowable concrete mixes, to achieve highest concrete durability and performance.
- Increases workability retention and cohesion.
- Optimises cement utilization.
- High density and impermeable concrete through very high water reduction.
- Improves shrinkage and creep behaviors.
- Minimizes segregation and bleeding problems by improving cohesion.
- Higher early and ultimate compressive strengths.
- Increases durability and resistance to aggressive atmospheric conditions thorough reduced permeability.
- High strength and high performance concrete.
- Structures with congested reinforcement.
- Improved cohesion allow for use in mass concrete pours and piling.
Hyperplast PC175 F1 is available in 25 liters pails, 210 liters drums and 1000 liters bulks supply.
Hyperplast PC175 F1 has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.
The recommended dosage of Hyperplast PC175 F1 is 0.40 - 2.50 liters/ 100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.
Representative trials should be conducted to determine the optimum dosage of Hyperplast PC175 F1 to meet the performance requirements by using the materials and conditions in actual use.
Hyperplast PC175 F1 complies with ASTM C494, Type F and G, depending on dosage used.
