Cookie Consent by FreePrivacyPolicy.com

Hyperplast PC202

High-performance polycarboxylic based superplasticiser with good workability retention

Hyperplast PC202 is a high-performance super plasticising admixture based on polycarboxylic polymers with long chains specially designed to enable the water content of the concrete to perform more effectively.

This effect can be used in high strength concrete and flowable concrete mixes, to achieve highest concrete durability and performance.

Downloads
Hyperplast PC202.pdf
TDS
Hyperplast PC202_MSDS.pdf
SDS
  • Optimises cement utilization.
  • High density and impermeable concrete through very high water reduction.
  • Improves shrinkage and creep behaviors.
  • Minimises segregation and bleeding problems by improving cohesion.
  • Higher early and ultimate compressive strengths.
  • Increases durability and resistance to aggressive atmospheric conditions thorough reduced permeability.
  • Acts as a water reducer and retarding admixture for the production of high strength and high performance concrete.
  • High strength and high performance concrete.
  • Structures with congested reinforcement.
  • Pre-cast concrete.
  • Improved cohesion allow for use in mass concrete pours and piling.
  • Self compacting concrete.

Hyperplast PC202 is available in 25 litre jerrycan, 210 litre drums and 1000 litre bulks supply.

Hyperplast PC202 has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.

The recommended dosage of Hyperplast PC202 is 0.50 - 2.20 litre per 100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.

Representative trials should be conducted to determine the optimum dosage of Hyperplast PC202 to meet the performance requirements by using the materials and conditions in actual use.

Hyperplast PC202 complies with ASTM C494, Type A and G, depending on dosage used.