Hyperplast PC240L
New generation hyperplasticising admixture for extended slump retention
Hyperplast PC240L is a new generation hyperplasticiser for concrete, based on polycarboxylic polymers with long chains specially designed to produce concrete with extensive workability.
This effect can be used to produce low viscosity concrete for mid-to-high scale projects or when pumping concrete over long distances is required.
- Under water micro concrete repair and grouting.
- For high levels of concrete pumping.
- Suitable for long distances with extended slump retention.
- Low viscosity concrete with Enhanced compressive strength.
- Structures with congested reinforcement.
- Pre-stressed concrete.
- Improved cohesion allows for use in mass concrete pours and piling.
- Producing concrete capable of maintaining its flow for 3 hours.
Hyperplast PC240L is available in 25 litre jerrycan, 210 litre drums and 1000 litre bulk supply.
Hyperplast PC240L has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.
The recommended dosage of Hyperplast PC240L is 0.5 - 3.5 litre per 100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.
Representative trials should be conducted to determine the optimum dosage of Hyperplast PC240L to meet the performance requirements by using the materials and conditions in actual use.
Hyperplast PC240L complies with ASTM C494, Type F and G, depending on used dosage.
