Cookie Consent by FreePrivacyPolicy.com

Formcoat S

Solvent based formwork release agent

Formcoat S is a ready for use, single component, release agent for formwork.

Downloads
Formcoat S_TDS_0.pdf
TDS
Formcoat S_MSDS_9.pdf
SDS
Formcoat S_MS.pdf
MS
  • Easy release, reduces damage to concrete surface and improves finish.
  • Minimizes surface blemishes and staining.
  • Improves fair-faced concrete quality.
  • Reduces opportunity of damage to formwork.
  • Extends formwork usable life.
  • Minimizes cleaning of formwork before re-use.
  • Inhibits corrosion of steel formwork.

Formcoat S is used as a release agent for most types of formwork allowing for easy stripping of formwork and improving concrete finish.

25 - 60 m²/litre depending on type, quality and absorption of formwork.
Non-absorbent surfaces require a single application. New, unsealed, timber surfaces may need recoating if the first application is absorbed into the timber.

Formcoat S is available in 25 litre pails and 210 litre drums.

Formcoat S has a shelf life of 12 months from date of manufacture if stored in proper conditions and sealed drums. Formcoat S should be stored under a shaded area at a minimum ambient temperature of 5°C.