Formcoat WS100
Formwork chemical release agent
Formcoat WS100 is a ready for use, single component chemical release agent for formwork.
Downloads
Formcoat WS100_0.pdf
TDS
Formcoat WS100_MSDS.pdf
SDS
Formcoat WS100_MS.pdf
MS
- Easy release, reduces damage to concrete surface and improves finish.
- Minimizes surface blemishes and staining.
- Improves fair-faced concrete quality.
- Reduces damage to formwork.
- Extends formwork usable life.
- Minimizes cleaning requirements of formwork before re-use.
- Inhibits corrosion of steel formwork.
Formcoat WS100 is used as a release agent for most types of formwork allowing for easy stripping of formwork and improving concrete finish.
30 - 70 m²/litre. Coverage rate is highly dependent on the quality, type and absorption of the formwork used.
Formcoat WS100 is available in 25 litre pails and 210 litre drums.
Formcoat WS100 has a shelf life of 12 months from date of manufacture if stored in proper conditions and sealed drums. Formcoat WS100 should be stored in a shaded area at a minimum ambient temperature of 5°C.
