Quickmast 105
Resin based injection crack repair system
Quickmast 105 is a two component, low viscosity epoxy resin system for crack injection applications in concrete, masonry, and brickwork.
Downloads
Quickmast 105_MS.pdf
MS
Quickmast 105 - Base_MSDS_3.pdf
SDS_Base
Quickmast 105 - Hardener_MSDS_3.pdf
SDS_Hardener
Quickmast 105_TDS_6.pdf
TDS
- Excellent bond strength to concrete, brickwork, and masonry.
- Low viscosity epoxy resin, formulated to allow cracks penetration down to 0.2 mm.
- Can be used in damp or dry conditions.
- Low creep.
- Non-shrink.
- Exhibit good chemical resistance.
- For injection of cracks in all types of structural concrete elements, masonry, and brickwork.
- Suitable for injecting cracks widths from 0.2 - 10 mm.
- Suitable for manual pouring into horizontal floor cracks.
Quickmast 105 is available in 1.6 kg (1.5 litre) and 5.32 kg (5 litre) packs.
Quickmast 105 has a shelf life of 18 months from date of manufacture if stored at a temperature of 25°C.
- Quickmast 105 is suitable for use in contact with potable water when tested in accordance to BS 6920.
- Quickmast 105 when tested at normal temperature, complies with the requirements of ASTM C881, Types I & IV, Grade 1 (see technical properties table).
