Quickmast 130-AC/
Elastic methacrylate based injection system
Quickmast 130-AC is a three component (optional four), low viscosity hydrophilic methacrylate based injection system with adjustable reaction time and controlled setting time.
Quickmast 130-AC is used for permanent and effective sealing and consolidation works in presence of water. The compound gels in a few seconds to a few minutes when an activator or initiator is added just before use.
Quickmast 130-AC reacts to produce a soft, elastic and tacky crosslinked gel. In wet or dry conditions, the volume of the gel increases or decreases in a reversible manner assuring perfect waterproofing.
- Excellent bond strength to concrete.
- Low viscosity, high fluidity system, formulated to allow small cracks penetration.
- Non-toxic, odorless, water-soluble material.
- Re-swelling possibility upon contact with water, the volume of the gel increases or decreases in a reversible manner assuring perfect waterproofing.
- Adjustable reaction and setting time.
- Elastic, can absorb limited movements when a polymer is used (B2 component - optional).
- Injection of wet and water bearing cracks in all types of structural concrete elements.
- Injection of grout injection hoses.
- Sealing of voids, cavities, and construction joints in concrete.
- Sealing and treatment of water infiltration and ground water ingress.
Quickmast 130-AC is available in:
- A1 component (resin): 20 kg
- A2 component (catalyst): 1 kg
- B1 component (initiator): 1 kg
- B2 component (polymer): 20 kg – [optional].
Quickmast 130-AC has a shelf life of 12 months from date of manufacture if stored at temperatures between 5 and 25ºC in dry conditions and original sealed containers and away from direct sunlight.
